Nortel 15000 参考指南
show atm stats vcs
308689-B Rev 00
17
show atm stats vcs
The
show atm stats vcs
command displays the ATM interface VC statistics
table. This table contains statistical information for all ATM VCs on the router or
specific information based on the filters you use.
specific information based on the filters you use.
This command allows for the following command filters (flags) and filter
arguments:
arguments:
The output includes the following information:
-slot
<slot>[/<connector>]
Displays statistical information about the specified slot or
slot/connector pair only.
slot/connector pair only.
-service
<service_name>
Displays statistical information about the specified
service record only.
service record only.
-vpi
<vpi>
Displays statistical information for the specified virtual
path identifier (VPI) only.
path identifier (VPI) only.
-vci
<vci>
Displays statistical information for the specified virtual
channel identifier (VCI) only.
channel identifier (VCI) only.
Slot/Conn
Slot and connector where the ATM interface is found.
VPI/VCI
Virtual path identifier (VPI)/virtual channel identifier (VCI)
of the VC.
of the VC.
Receive Packets
Number of Service Data Units (SDUs) received without
error.
error.
Transmit Packets
Number of Service Data Units (SDUs) transmitted without
error.
error.
Receive Octets
Number of octets received without error.
Transmit Octets
Number of octets transmitted without error.
Transmit Clips
Number of frames clipped (dropped) by the SAR and the
hardware due to transmit congestion.
hardware due to transmit congestion.