Nortel 15000 参考指南
show controllers atm
32
308689-B Rev 00
Controller Show Commands
This section describes the controller show commands and the information in the
tables the router displays.
tables the router displays.
show controllers atm
The
show controllers atm
command
displays information about ATM interfaces
on a router. This command allows for the following options:
The output includes the following information:
<slot/connector>
Displays information only for the specified slot and
connector.
connector.
ATM
Slot and connector for the ATM interface described by the
statistics that follow.
statistics that follow.
SECTION
LOF
Number of frames lost.
LOS
Number of lost signals.
BIP (B1)
Number of bit interleaved parity section errors.
LINE
AIS
Number of alarm indication signals.
RDI
Number of remote defect identifications.
FEBE
Number of far end block errors.
BIP(B2)
Number of bit interleaved parity line errors.
PATH
AIS
Number of alarm indication signals.
RDI
Number of remote defect identifications.
FEBE
Number of far end block errors.
BIP(B3)
Number of bit interleaved parity path errors.
LOP
Number of times the loss of pointer occurred.
PLM
Number of path signal label mismatches.