Nortel 15000 发行公告

Known Anomalies for the Versalar Switch Router 15000

4

302773-E Rev 00

Number:

128117-1

Description:

If you repeatedly press the Enter key on the console PC or terminal keyboard 
immediately following a boot command, the Versalar 15000 may enter diagnostic 
monitor mode.

Workaround:

Enter the boot command again, at the diagnostic monitor prompt.

Number:

122302-2

Description:

If you configure an IGMP static group, save the configuration to a file, and use the 

 command to load the file, the following error message will appear:

Specified interface is not a configured local IP address on this 

box.

IGMP#

Workaround:

For IGMP, add static groups at the end of the source file.

Number:

91586-1

Description:

The BCC currently supports only one active 

 command session at a time. If you 

execute a BCC 

 command, no other user can successfully issue a 

command until you complete the session. If another user attempts to execute a BCC 

 command while your 

 command is paused, the other user’s 

 

command hangs. 

Number:

130580-1

Description:

BCC help for the IP 

 object is missing information for the 

 parameter. In addition, the help incorrectly refers to a 

 parameter for the 

 object; no such parameter exists.

Workaround:

Help for the 

 parameter for the IP 

 object 

should provide the following definition: 

The name of the local router circuit associated with the static 

route over an unnumbered interface.