Nortel 1110 用户指南
Page 304 of 630
Nortel IP Phone 1110
553-3001-368 Standard 26.00 August 2007
Introduction
This section explains how to install and maintain the IP Phone1110. For
information on using the IP Phone 1110, see the IP Phone 1110 User Guide.
information on using the IP Phone 1110, see the IP Phone 1110 User Guide.
This section contains the following procedures:
•
•
•
•
•
•
•
•
Note: After an IP Phone has been installed and configured, if power to
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
Description
The IP Phone 1110 uses the customer IP data network to communicate with
the Communication Server 1000. The IP Phone 1110 translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1110 network connection, and connection to the
Communication Server 1000.
the Communication Server 1000. The IP Phone 1110 translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1110 network connection, and connection to the
Communication Server 1000.
shows the IP Phone 1110.