Nortel 1110 用户指南
Page 346 of 630
Nortel IP Phone 1120E
553-3001-368 Standard 26.00 August 2007
Introduction
This section explains how to install and maintain the IP Phone1120E. For
information on using the IP Phone 1120E, see the IP Phone 1120E User
Guide (NN43112-103).
information on using the IP Phone 1120E, see the IP Phone 1120E User
Guide (NN43112-103).
This section contains the following procedures:
•
•
•
•
•
•
•
Note: After an IP Phone has been installed and configured, if power to
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
the phone is interrupted, re-entry of the IP parameters, Node Number,
TN, or re-acquisition of firmware is not required.
Description
The IP Phone 1120E uses the customer IP data network to communicate with
the Communication Server 1000. The IP Phone 1120E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1120E network connection, and connection to the
Communication Server 1000.
the Communication Server 1000. The IP Phone 1120E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1120E network connection, and connection to the
Communication Server 1000.
shows the IP Phone 1120E