Nortel 1110 用户指南
Installation and configuration
331
44
If the XAS supports graphical displays, use the Right navigation key
to scroll and highlight Graphical XAS check box. Press the Enter
key to switch this item on and off.
to scroll and highlight Graphical XAS check box. Press the Enter
key to switch this item on and off.
45
Use the Right navigation key to scroll and highlight Port list. Press
the Enter key to start the edit mode. Use the dialpad to fill in the
information.
the Enter key to start the edit mode. Use the dialpad to fill in the
information.
46
Upgrade the IP Phone 1120E firmware.
The IP Phone 1120E supports remote firmware upgrades through a
TFTP process and an automated UFTP process.
TFTP process and an automated UFTP process.
The method to upgrade the firmware depends on the following Call
Server software
Server software
•
For Succession Release 3.0 or CS 1000 Release 4.0, the TFTP
Server is required to download the current firmware. Enter the
TFTP Server IP address at the prompt.
Server is required to download the current firmware. Enter the
TFTP Server IP address at the prompt.
•
For CS 1000 Release 4.5, use either a TFTP Server to upgrade
the firmware (at the prompt accept the default entry of 0.0.0.0) or
UFTP to download the current firmware.
the firmware (at the prompt accept the default entry of 0.0.0.0) or
UFTP to download the current firmware.
•
For CS 1000 Release 5.0, a Signaling Server provides the
firmware for the IP Phones. Check the Nortel Web site at
firmware for the IP Phones. Check the Nortel Web site at
for updated firmware files.
For Succession Release 3.0 and CS 1000 Release 4.0, the IP Phone
1120E searches for the TFTP Server for firmware upgrade. If the file
name specified in 1120e.cfg is not the same as the current firmware,
the IP Phone downloads the file and upgrades the firmware. This
takes several minutes. When the upgrade is complete, the IP Phone
1120E reboots.
1120E searches for the TFTP Server for firmware upgrade. If the file
name specified in 1120e.cfg is not the same as the current firmware,
the IP Phone downloads the file and upgrades the firmware. This
takes several minutes. When the upgrade is complete, the IP Phone
1120E reboots.
For further information about TFTP Server configuration, see
.
The Enhanced UNIStim firmware download is supported on CS 1000
Release 4.5 or later. The Enhanced UNIStim firmware download
feature for IP Phones improves the delivery of new firmware to IP
Phones. For further information about Enhanced UNIStim Firmware
Download, see IP Line Fundamentals (NN43100-500).
Release 4.5 or later. The Enhanced UNIStim firmware download
feature for IP Phones improves the delivery of new firmware to IP
Phones. For further information about Enhanced UNIStim Firmware
Download, see IP Line Fundamentals (NN43100-500).
For information about the IP Phone firmware upgrade using Element
Manager, see Element Manager System Reference—Administration
(NN43001-632).
Manager, see Element Manager System Reference—Administration
(NN43001-632).
47
The IP Phone 1120E searches for the connect server.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2003–2007, Nortel Networks
.