Nortel m3900 安装指导
Analog Terminal Adapter Installation and Reference Guide
N0023538
1 of 3
Standard 2.00
This installation and reference card describes how to install and use the Analog Terminal Adapter (ATA) (NTMN68xx)
with your M3900 Series Digital Telephone.
with your M3900 Series Digital Telephone.
The ATA allows an off-the-shelf analog device (FAX, modem, or analog [500/2500-type] telephone) to work
simultaneously with your M3902, M3903, M3904, or M3905 Series Digital Telephone.
Note:
simultaneously with your M3902, M3903, M3904, or M3905 Series Digital Telephone.
Note:
The ATA is not supported on the M3901 telephone.
Connecting the
analog device
analog device
Install the Accessory Connection Module (ACM) (NTMN71AA) into your M3900 Series
Digital Telephone before you install your ATA. The ACM provides connection capabilities
between the M3902, M3903, M3904, and M3905 telephones and the ATA.
A wall transformer is required to connect the ATA to the electrical outlet. Contact your
Nortel distributor for the recommended wall transformer.
Digital Telephone before you install your ATA. The ACM provides connection capabilities
between the M3902, M3903, M3904, and M3905 telephones and the ATA.
A wall transformer is required to connect the ATA to the electrical outlet. Contact your
Nortel distributor for the recommended wall transformer.
To install the ATA:
1. Insert the ATA accessory cartridge into the ACM. The latch must be at the top.
2. Connect the commercial device you have selected to use—either your FAX machine,
1. Insert the ATA accessory cartridge into the ACM. The latch must be at the top.
2. Connect the commercial device you have selected to use—either your FAX machine,
modem, or analog (500/2500-type) telephone—to the connection on your ATA
cartridge interface.
cartridge interface.
3. Plug the wall transformer into an electrical outlet. Use only the transformer designed for
the ATA.
4. Connect the adapter plug, attached to your transformer, into the wall jack.
5. Connect the six-conductor line cord from the telephone to the adapter jack attached to
5. Connect the six-conductor line cord from the telephone to the adapter jack attached to
the wall transformer. Refer to the Accessory Connection Module Installation Guide for
further information.
further information.
6. Refer to the manufacturer’s documentation for complete installation and configuration
instructions for your external analog device (FAX, modem, or analog [500/2500-type]
telephone).
telephone).
Note:
The ATA supports connections to Plain Old Telephone Service (POTS) services only.
Features such as Message Waiting, Switchhook Flash/Link, Transfer, Conference,
and CLASS type services are not supported on the attached device.
Features such as Message Waiting, Switchhook Flash/Link, Transfer, Conference,
and CLASS type services are not supported on the attached device.