Lowrance 3300c 操作指南

47

4. Press 

↓ to 

|

. Enter the longitude by pressing 

↑ or ↓ to

change the first character, then press 

→ to the next character and repeat

until the longitude is correct. Press 

, then 

|

 to return to the

previous page display. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:

1. Press 

|

↑ to 

|

. To look up the nearest waypoint,

press  

↓

 

to 

|

; or, to look by name (and scroll through the en-

tire waypoint list), press 

. For this example, look by name.

2. If your waypoint list is a long one, you can spell out the waypoint name
in the 

 box to search for it. (Press 

↑ or ↓ to change the first

character, then press 

→ to move the cursor to the next character and re-

peat until the name is correct, then press 

 to jump to the list below.)

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and the

waypoint information screen appears with the 

 command selected.

4. To begin navigating to the waypoint, press 

.

Navigation Page, navigating toward waypoint 001 and leaving a trail.