Lowrance 3500c 操作指南

21 

To add an MMC or SD Card 
1. Open the card compartment door. 

2. Grasp the bottom of the MMC and push the top of the card into the 
slot. Once the card is started, use your fingernails to slide it the rest of 
the way to the left, until it is firmly seated in the slot. 

3. Close the compartment door and fasten the thumb screw finger tight. 

Other Accessories 

Other accessories include MMC cards, MMC card readers and MapCre-
ate™ 6 custom mapping software for your computer. MMC card readers 
are available in USB and parallel port versions. 

If these accessories are not available from your dealer, see the acces-
sory ordering information on the inside back cover of this manual. 

 

MapCreate™ 6 CD-ROM, left; MMC card reader for USB ports, right. 

Now that you have your GlobalMap 3500C installed, move on to Section 
3,  Basic GPS Operations. There, we'll present a series of step-by-step 
tutorials to teach you the basics of GPS navigation. 

Face Cover 

Your unit comes with a white protective cover that snaps on and off the 
front of the unit. This cover is intended for use when your unit and the 
vehicle it's mounted in are idle. 

WARNING: 

When the unit is mounted in an unprotected area, such 
as an open boat cockpit, the protective face cover must 
be removed when the vehicle is moving at high speed. 
This includes towing a boat on a trailer at highway 
speeds. Otherwise, wind blast can pop off the cover.