Lowrance 5200c 操作指南

下载
页码 164
 
 
A minimum of three satellites are required to determine a 2D fix. 
The system requires signal reception from three satellites in order to 
determine a position. This is called a 2D fix. It takes four satellites to 
determine both position and elevation (your height above sea level — 
also called altitude). This is called a 3D fix. 
Remember, the unit must have a clear view of the satellites in order to 
receive their signals. Unlike radio or television signals, GPS works at 
very high frequencies. These signals can be easily blocked by trees, 
buildings, an automobile roof, even your body. 
Like most GPS receivers, this unit doesn’t have a compass or any other 
navigation aid built inside. It relies solely on the signals from the satel-
lites to calculate a position. Speed, direction of travel, and distance are 
all calculated from position information. Therefore, in order for the 
GlobalMap to determine direction of travel, you must be moving and 
the faster, the better. This is not to say that it won’t work at walking or 
trolling speeds — it will. There will be more "wandering" of the data 
shown on the display. 
GPS is plenty accurate for route navigation, but the U.S. Federal Avia-
tion Administration has special needs for aircraft traffic control that go 
beyond basic GPS. The FAA has a plan under way to boost GPS per-
formance even further with its Wide Area Augmentation System, or 
WAAS.  
This GPS add-on will include a time control element that will help air-
liners fly closer together while avoiding collisions. In addition to care-
fully spacing airplanes along travel corridors, WAAS will eventually 
make instrument landings and takeoffs more accurate as it replaces 
existing aviation navigation systems.