Lowrance 5200c 操作指南

 

76 

from that reference point. For example, if it shows a distance of UP 

4.00" and LEFT 0.50", you then measure up four inches and to the left 

a half-inch from the reference point on the map to find your location. 
To configure a map fix: 
To use this format, you need to follow these steps in order. First, take 

your map of the area and determine a reference latitude/longitude. In 

order for this system to work, the latitude/longitude lines must be par-

allel with the edge of the map. USGS maps are parallel, others may not 

be.  
Also, this works better with smaller scale maps, such as 1:24000. The 

reference position can be anywhere on the map, but the closer it is to 

your location, the smaller the numbers will be that you'll have to deal 

with.  
Once you've decided on a reference position, you can save it as a way-

point. See the waypoint section for information on saving a waypoint. 

Save the reference position as a waypoint. Exit from the waypoint 

screens. 
1. Press 

|

|

↓ to 

|

. 

2. Press 

↓ to 

|

. 

3. Press 

↓ to 

|

.  

The screen below appears, and 

 is highlighted. Press 

 and 

enter the map's scale. This is generally at the bottom of the paper map. 

It's shown as a ratio, for example 1:24000. Press 

 and the unit re-

turns to the Configure Map Fix screen.