Lowrance 5150c 操作指南

下载
页码 140
27 
 
 
 
Satellite Status Page. The first image (left) indicates unit has not locked 
on to any satellites and has no fix on its position. The second image (cen-
ter) shows satellites being scanned. The third image (right) shows satel-
lite lock-on with 3D position acquired (latitude, longitude and altitude), 
and WAAS reception. 
This screen shows a graphical view of the satellites that are in view. Each 
satellite is shown on the circular chart relative to your position. The point in 
the center of the chart is directly overhead. The small inner ring represents 
45° above the horizon and the large ring represents the horizon. North is at 
the top of the screen. You can use this to see which satellites are obstructed 
by obstacles in your immediate area if the unit is facing north. 
The GPS receiver is tracking satellites that are in bold type. The re-
ceiver hasn't locked onto a satellite if the number is grayed out, there-
fore it isn't being used to solve the position. 
Beneath the circular graph are the bar graphs, one for each satellite in 
view. Since the unit has twelve channels, it can dedicate one channel 
per visible satellite. The taller the bar on the graph, the better the unit 
is receiving the signals from the satellite. 
You can set up custom digital gauges through the Satellite Status page 
menu. The Custom Gauges feature allows you to monitor a wide vari-
ety of data from one page.  
To set up Custom Gauge page: 
1. Select the 
S
ATELLITE 
S
TATUS
 page from the Pages menu, highlight 
C
US-
TOM 
G
AUGES
 and press 
ENT
2. Press 
MENU
O
VERLAY 
D
ATA 
will highlighted. Ppress 
ENT
. The Overlay 
Data shown menu will appear.