Lowrance 5150c 操作指南

79 

The GPS simulator lets you use the unit as if you were outdoors navigat-

ing somewhere. It's a great way to practice using your unit. You can set 

the starting location by entering latitude/longitude (Starting Position) or 

from a stored waypoint, map place or POI location (

 com-

mand). You can steer your position and change speed on the map by us-

ing the arrow keys (

 command) or by setting the track 

and speed in the dialog boxes provided on the simulator menu screen. 
To get to the GPS Simulator: 

1. Press 

|

, highlight 

and press

. 

2. Highlight 

 and press

. The GPS Simulator Menu ap-

pears. 

   

  

3. Highlight 

 and press 

 to turn on (check) or turn 

off (uncheck) the GPS Simulator. Press 

 repeatedly to return to the 

map display. 
Simulating Trail or Route Navigation 
In Simulator mode, your unit can automatically follow a trail or route 

without manual steering if you use these steps: 
1. From the Map Page, go to the simulator menu. Pick a 

 at or near the beginning of your trail/route. Enter an approxi-

mate 

 (shown in compass degrees) that will point you toward the 

start of the trail/route. 
2. Set 

 to zero. Select 

 command and press 

, 

which turns on the simulator and returns you to the Map Page.