Lowrance hds-5x 用户手册
59
Settings
Installation Adjustment Menu
The installation adjustment menu is used to make adjustments to bearing alignment,
The installation adjustment menu is used to make adjustments to bearing alignment,
range offset, antenna height and open array park angle.
When the installation adjustment menu is accessed, press the
When the installation adjustment menu is accessed, press the
keypad up/down to select a feature. Press the keypad left/
right to make adjustments to a selected feature.
Press
Press
exIT to return to the Radar Installation menu. To
remove the Radar Installation menu from the screen, select
Close and press enTeR.
Bearing alignment
Used to align the bow of your vessel with the heading line (zero point). Bearing
alignment is also referred to as zero bearing.
To make adjustments to bearing alignment, switch the radar state to Transmit and set
To make adjustments to bearing alignment, switch the radar state to Transmit and set
radar orientation to Heading Up.
To select Heading up orientation:
1. From the Radar Page, press
MenU.
2. Select Orientation and press
enTeR.
3. Use the keypad to select Heading Up and press
enTeR.
4. Press
exIT.
Bow of ship is lined up with
the tip of a peninsula; the
bearing line is not.
Before Bearing Alignment
After Bearing Alignment
Bearing line aligned with
peninsula, matching the
alignment of the bow.
Adjustment Menu