Lowrance expedition c 操作指南

82

To start a new scouting session:

1. From the Map page, press 

|

↓ to 

|

|

.

2. If you have not created a scout plot before, highlight New Scout and
press 

. Scout 1 will appear in the scout plot list below. Select Scout

1 and Press 

.

 

   

Scout Plot menus.

3. The Scout menu appears. To make the scout active, highlight 

and press

, then scroll down to 

 and press 

. The Edit

Scout points menu will appear. Select 

 and press 

.

   

   

An active scouting session (left), denoted by the checkbox next to Ac-

tive. Scout end selected on Scout menu (center). Add from Map high-

lighted on the Edit Scout points menu (right).

4. As you walk the perimeter of the area you are scouting, you will rec-
ord a series of scouting waypoints that will be used to draw the scout
plot boundary. You need to set enough points to roughly outline the
area's corners. For example, while scouting a square soybean field you
could record the field boundary by setting just four points.

To set the first point, press 

 and the new waypoint menu appears.

Choose a point and press 

. The New Waypoint Name box will ap-

pear with a list of waypoint symbols. Select the desired icon and press

. The New Waypoint Name window will appear with