Lowrance explorer 操作指南

40

The Transfer My Data submenu asks if you want to save data to the

MMC or load data from the MMC into the iFINDER's memory.

2. If no MMC is present, a message will appear letting you know there
is no card in the iFINDER. You must insert a card to activate the Load
or Save commands.

To transfer data from the iFINDER to the MMC, press 

.

To transfer data from the MMC to iFINDER, press 

→ to 

|

.

3.  Saving: To accept the default name Data for the GPS Data File,
press 

↓ to 

|

. If you wish to rename the file (as in the example

below), press 

 to activate the selection box. Press 

↑ or ↓ to change

the first character, then press 

→ to the next character and repeat until

the name is correct. Then, press 

|

↓ to 

|

.

The unit will display a completion message when the data transfer is
finished. To return to the main page display, press 

 repeatedly.

   

   

These figures (from left to right) show the menu sequence for naming

and saving a GPS Data File from an MMC to the iFINDER's memory.

4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press 

 to activate the selection box, use 

↓ or ↑

to highlight the file, then press 

 to accept the selection. Next, press

↓ to 

|

. The unit will display a completion message when the

data transfer is finished. To return to the main page display, press

|

.