Lowrance explorer 操作指南

78

Press 

↓ to 

|

, which will launch the Select Point window

with three options: My Waypoints, Map Places and Highway Exits. If
you saved the reference point as a waypoint, choose 

 

 by

pressing 

|

, which will bring up the Waypoint list with the way-

point nearest your location at the top. Use the 

↓

↑

keys to select the

waypoint you want to assign as a reference point and press 

. The

unit displays a waypoint information screen with the command 

 selected. Press 

 and the unit returns to the Configure Map

Fix menu. Press 

 to close this menu. Now press 

↑ to 

|

, select 

 from the list and press 

. All position infor-

mation now will be shown as a distance from the reference waypoint
you chose. Press 

 repeatedly to return to the main page display.

Customize Page Displays

The Digital Data, Navigation, Compass and Map pages all have cus-
tomizable options available in Advanced Mode. The options give you
control over what information will be viewed on each page.

Customize Digital Data Page
While on the Digital Data Page, press 

|

↓ to 

|

. A

data box begins to flash. Use the arrow keys to select a box containing
data you want to change. With the desired box highlighted and flash-
ing, press 

 to open a list of data options. Use 

↓ ↑ to select a data

category, then press 

.

You will be directed back the Digital Data

page, where the new data will be displayed in the data box you selected.
You can repeat these steps to change the display in another box. When
you are satisfied with your changes, press 

.

NOTE:

To change the data in the large data box at the top of the Digital
Data page use the 

↑ ↓ keys. There are three data options you can

rotate through: Position, Altimeter History and Pressure History.

Customize Navigation Page
While on the Navigation Page press 

|

↓ to 

|

. Use 

↓

↑

to select a data option you want to display and press 

, which will

turn on (check) or turn off (uncheck) the selected data option. Check or
uncheck other data options to change the data displayed in other boxes.
If you get an Overlay Limit Exceeded message, you must turn off (un-
check) a data category before you will be able to add another category.
When you are satisfied with the changes, press 

.

Customize Compass Page
While on the Compass Page press 

|

↓ to 

|

. Use 

↓ or ↑

to select a data option you want to display and press 

, which will