Lowrance hunt c 操作指南
44
Power/lights on and off
To turn on the unit, press
PWR
. To turn on the backlight, press
PWR
again. Pressing
PWR
once again will turn off the backlight. (Press
EXIT
to clear any message or alarm displays.)
Turn off the unit by pressing and holding the
PWR
key for 3 seconds.
Main Menu
Advanced Mode has a single Main Menu, which contains some function
commands and some setup option commands. The instructions in this
section will deal only with functions — the basic commands that make
the iFINDER do something. For these instructions, the iFINDER will
work fine right out of the box with the factory default settings. But, if
you want to learn about the various options, see Sec. 5, System Setup
and GPS Setup Options.
commands and some setup option commands. The instructions in this
section will deal only with functions — the basic commands that make
the iFINDER do something. For these instructions, the iFINDER will
work fine right out of the box with the factory default settings. But, if
you want to learn about the various options, see Sec. 5, System Setup
and GPS Setup Options.
1. To get to the main menu from any page press
MENU
|
MENU
. To clear
the menu screen and return to the page display, press
EXIT
.
Main Menu, Advanced Mode.
Screen: changes contrast or brightness of display screen and backlight
delay.
delay.
Sounds: enables or disables sounds for key strokes and alarms and
sets the alarm style.
sets the alarm style.
Transparency: adjusts the level of transparency for menus.
Alarms: changes alarm thresholds and allows users to turn on or off
GPS alarms.
GPS alarms.
Route Planning: allows you to plan, view or navigate routes.
My Trails command: used to show, create, edit or delete trails.
Cancel Navigation: turns off the navigation command after you have
reached the end of a back trail or your destination.
reached the end of a back trail or your destination.