Lowrance hunt c 操作指南
66
will consist of a series of asterisks. To erase or add an asterisk in the
series, use the
series, use the
↑ ↓ keys. To move on to the next asterisk in the series,
press
the
→
key. When you are satisfied with the new pattern, press
ENT
. Press
EXIT
repeatedly to return to the previous page display.
Transfer Custom Maps and GPS Data Files
Custom Maps:
Custom maps work only from the MMC card or SD card. When a card
containing a Custom Map File is loaded into the unit, it automatically
loads the map into memory when the unit is turned on.
containing a Custom Map File is loaded into the unit, it automatically
loads the map into memory when the unit is turned on.
Instructions for copying Custom Map Files to an MMC are contained in
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting an MMC into the iFINDER, see
Sec. 2, Installation/Accessories.
the instruction manual for your MMC card reader and MapCreate 6
software. For instructions on inserting an MMC into the iFINDER, see
Sec. 2, Installation/Accessories.
GPS Data files:
GPS Data Files contain waypoints, routes, trails and event marker
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
icons. Instructions for copying GPS Data Files between your computer
and an MMC are contained in the instruction manual for your MMC
card reader and MapCreate 6 software.
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the iFINDER's internal memory before the unit can read
them. Here's how:
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the iFINDER's internal memory before the unit can read
them. Here's how:
1. Insert the MMC into your unit. Press
MENU
|
MENU
|
↓ to
S
YSTEM
S
ETUP
|
ENT
|
↓ to
T
RANSFER
M
Y
D
ATA
|
ENT
.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the iFINDER in order to activate the Load or Save commands.
MMC is present or not. If no MMC is present, you must first insert a
card into the iFINDER in order to activate the Load or Save commands.
To transfer data from the iFINDER to the MMC: press
ENT
(for
S
AVE
.)
To transfer data from the MMC to the iFINDER: press
→ to
L
OAD
|
ENT
.
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
Data File, press
↓ to
S
AVE
D
ATA
|
ENT
. If you wish to rename the file,
press
ENT
to activate the selection box. Press
↑ or ↓ to change the first
character, then press
→ to the next character and repeat until the
name is correct. Then, press
ENT
|
↓ to
S
AVE
D
ATA
|
ENT
.