Lowrance m&m 用户手册

41

Navigate to a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command. However, you can avoid
scrolling the map to pick your waypoint if you use the Find commands:

1. Press 

|

. To look up the nearest waypoint, press 

, or to

look by name (and scroll through the entire waypoint list), press 

↓|

.

For this example, look by name.

2. If your waypoint list is a long one, you can spell out the waypoint name
in the 

 box to search for it. (Press 

↑ or ↓ to change the first

character, then press 

→ to move the cursor to the next character and re-

peat until the name is correct, then press 

 to jump to the list below.)

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and the

waypoint information screen appears with the 

 command selected.

4. To begin navigating to the waypoint, press 

.

Navigate a Trail
1. Press 

|

|

↓ to 

|

 and a screen similar to the

one below appears.

Trails Menu.

2. Press 

↓ then use ↓ or ↑ to select a trail to navigate.

3. With the trail name highlighted, press 

|

↓ to 

|

.

4. Wait while iFINDER creates a route from the trail. When the prog-
ress message disappears, the unit displays a trail information screen,
with the 

 command highlighted in the top command box.