Lowrance 250c 安装指导

下载
页码 8
 1 
Pub. 988-0154-631 
 
Mounting Instructions 
For Automotive GPS Receivers 
This instruction sheet describes how to assemble and use the quick-
release flexible suction cup mount for Lowrance
®
 automotive GPS re-
ceivers. The flexible suction cup mount is useful for mounting on glass 
or other smooth surfaces.  
These mounts allow you to make non-mar installations without drill-
ing, screws or permanent adhesives. And since each mount is portable, 
it's easy to transfer the GPS unit to another vehicle. 
W A R N I N G !  
When a GPS receiver is used in an automobile the driver 
is solely responsible for operating the vehicle in a safe 
manner. Drivers must maintain full surveillance of all 
pertinent driving conditions at all times. 
An accident or collision resulting in damage to property, 
personal injury or death could occur if the operator of a 
GPS-equipped vehicle fails to pay full attention to travel 
conditions and vehicle operation while the vehicle is in 
motion. Do not attempt to configure, adjust or enter in-
formation into your GPS unit while driving. 
When mounting a GPS unit in an automobile you must 
avoid any installation that obscures important instru-
ments and controls or restricts the driver's view through 
the vehicle's windows.  
Avoid placing the GPS where it could be propelled by an 
activated airbag. Some states restrict mounting any elec-
tronic device in any location on an automobile dash or 
windshield. Be sure to check your local laws before us-
ing these mounts. 
Be sure to check the suction mount for adequate adhe-
sion each time you use the unit and reinstall it if neces-
sary. 
This is a portable mounting device and the normal heat-
ing and cooling cycle of a car's interior will eventually 
loosen the seal. A loose suction cup could allow the unit 
to fall or come loose during vehicle operations. 
™