Lowrance lcx-112c 操作指南

 

90

3. To use the default sonar chart log stored in the unit, press 

↓ to 

. The recorded chart 

begins scrolling across the screen, just as if you were on the water. 
4. Turn off the Sonar Simulator by pressing 

|

|

↓ to 

|

|

↓ to 

|

|

↓ to 

|

→ to

↓ 

 

. 

 

The Sonar Simulator can use sonar charts recorded (logged) on a MMC 

card (To see how, read the entry in this section on Log Sonar Chart Data). 

To play back a sonar chart, make sure the MMC containing the chart is 
installed, then: 
1. Press 

|

|

↓ to 

|

|

↓ to 

|

. 

2. Press 

↓ to 

|

. 

3. Use 

↓ or ↑ to select chart name|

|

↑ to 

|

|

. 

While you're in the Sonar Simulator menu, don't forget to check Simulate 
Position if you want to run the sonar and GPS simulators simultaneously. 

As you review sonar logs, you can create waypoints to mark sites you 

want revisit. 
While the simulator is running, you can switch from one chart log to 

another by opening the Sonar Simulator menu and using the instructions 
in step 2 to select a different chart. 

If you turn on your unit before attaching a transducer, it may enter a 

demo mode. The words "demo mode" flash on the bottom of the screen and 
a sonar chart plays much like the simulator. Unlike the simulator, the 

demo mode is for demonstration only, and will automatically stop as soon 

as you turn on the unit with a transducer attached. The simulator will 
continue to function normally.