Lowrance lcx-112c 操作指南
100
3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map and sonar chart cursors
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map and sonar chart cursors
and enter data.
5. ENT/ICONS (Enter & Icons) – This key allows you to save data,
accept values or execute menu commands. It is also used to create
5. ENT/ICONS (Enter & Icons) – This key allows you to save data,
accept values or execute menu commands. It is also used to create
event marker icons.
6. EXIT – The Exit key lets you return to the previous screen, clear data or
close a menu.
7. WPT – (Waypoint) The Waypoint key is used to save and recall
waypoints, search for waypoints and access the waypoint list. It also
6. EXIT – The Exit key lets you return to the previous screen, clear data or
close a menu.
7. WPT – (Waypoint) The Waypoint key is used to save and recall
waypoints, search for waypoints and access the waypoint list. It also
launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom out the map. On the Sonar
8. ZOUT – (Zoom Out) – This key lets you zoom out the map. On the Sonar
Page, this key returns you to a full sonar chart display, showing the entire
water column from surface to bottom. On the Map Page, this lets you see a
water column from surface to bottom. On the Map Page, this lets you see a
larger geographic area on the map. You see less detail zooming out.
9. ZIN – (Zoom In) – This key lets you zoom in on the map. On the Sonar
Page, this key enlarges fish signals and bottom detail. On the Map Page,
9. ZIN – (Zoom In) – This key lets you zoom in on the map. On the Sonar
Page, this key enlarges fish signals and bottom detail. On the Map Page,
zooming in lets you see more detail in a smaller geographic area on the map.
Power/lights on and off
To turn on the unit, press
PWR
. As the unit powers up, the Map Page is
displayed first (To switch to another page, press
PAGES
|
← or → to Page
Name|
EXIT
.).
To turn on the backlight, press
PWR
again. The unit has three backlight
levels. Repeatedly pressing
PWR
will cycle through the backlight settings
and turn off the backlight.
Turn off the unit by pressing and holding the
Turn off the unit by pressing and holding the
PWR
key for 3 seconds.
Main Menu
The unit has a Main Menu, which contains some function commands and
some setup option commands. The tutorial lessons in this section will deal
some setup option commands. The tutorial lessons in this section will deal
only with functions and basic commands that make the Unit do something.
The unit will work fine for these lessons right out of the box with the factory
default settings. But, if you want to learn about the various options, see Sec.
default settings. But, if you want to learn about the various options, see Sec.
8, System Setup and GPS Setup Options.
You can access the Main Menu from any of the four Page screens by
You can access the Main Menu from any of the four Page screens by
pressing
MENU
|
MENU
. To clear the menu screen and return to the page
display, press
EXIT
.