Lowrance lcx-112c 操作指南

 

117

1. Press 

|

→ to 

 column|

↓ to 

|

. 

2. Press 

↓ to 

|

|

→ to 

|

. 

3. Press 

→ to 

|

. Enter the latitude by pressing 

↑ or ↓ to change 

the first character, then press 

→

 to the next character and repeat until the 

latitude is correct. Press 

. 

4. Press 

↓ to 

|

. Enter the longitude by pressing 

↑ or ↓ to 

change the first character, then press 

→ to the next character and repeat 

until the longitude is correct. Press 

, then 

|

 to return to the 

previous page display. The waypoint is saved and automatically given a 
name with a sequential number, such as "waypoint 001." The waypoint 

symbol and number appear on the map and in the waypoint list. 

You can select any waypoint visible on the Map Page with the cursor, 

then use the Navigate to Cursor command, which will be covered later 

in this section. You can avoid scrolling the map to pick your waypoint if 
you use the Find Waypoint commands: 

1. Press 

|

→ to 

|

. To look up the nearest waypoint, press  

↓  to 

|

 or, to look by name and scroll through the entire 

waypoint list, press 

. For this example, we’ll look by name. 

2. If your waypoint list is a long one, you can spell out the waypoint 
name in the 

 box. Press 

↑ or ↓ to change the first character, 

then press 

→ to move the cursor to the next character and repeat until 

the name is correct, then press 

 to jump to the list below. 

3.  If  the  list  is  short,  you  can  jump  directly  to  the 

 box by 

pressing 

. Use 

↑ or ↓ to select the waypoint name, press 

 and 

the waypoint information screen appears with the 

 

command selected. 
4. To begin navigating to the waypoint, press 

.