Lowrance lcx-112c 操作指南

 

190

8. Repeat Steps 5-7 for each remaining tank.  
9. When all tanks have been configured, press the 

 

button. The following confirmation message will appear: Are you sure 

you wish to change the bus configuration? Choose 

 and press 

, 

Press 

 to get back to the main display. 

Device Configuration Menu 
When a device is selected from the network devices list on the Bus 

Configuration menu, its Device Configuration menu will appear. Device 
configuration menus vary among devices. Available functions on device 

configuration menus allow you to change device names, tank sizes, fluid 

types and provide access to the Advanced Options menu. We will cover 
configuration and calibration later in this section. 
Device Information and Device Data 
The Device information panel, located to the left of the Device Configuration 
menu, displays information on the selected device that includes, software 

version, model, address, serial number, instance and current status.  

 

Device Data is shown in the Device Data window at the bottom of the device 

configuration menu. The information displayed in the Device Data window 

will vary among devices. If, for example, you are viewing the device 
configuration menu for an EP-15 Fluid Level, the device data window will 

include tank size and the amount of fuel left in the tank. The Device Data for 

an EP-10 Fuel Flow includes Fuel Rate (amount of fuel burned per hour), Fuel 
Used, Trip Fuel Used and Seasonal Fuel Used.  
NOTE: 

If, as in the graphic above, you do not have a Suzuki Engine Interface, EP-

15 Fluid Level or EP-10 Fuel Flow on the network, the Engine & 

Configuration menu, Tank Select menu, Tank Size dialog and Set 
Configuration button will not be displayed on the Bus Configuration menu.