Lowrance lcx-112c 操作指南
42
Front view (left) and side view (right) showing dimensions of the LCX-
37
C
and LCX-38C
HD mounted on gimbal brackets.
To pass all connectors through the 1" hole, first pass the transducer
connector up through the hole from under the dash, followed by the
connector up through the hole from under the dash, followed by the
antenna connector and any accessory cables. Next, pass the power
cable's bare-wire end down though the hole from the top.
If you wish, you can fill in the hole around the cables with a good
marine caulking compound. No matter what type of installation you
cable's bare-wire end down though the hole from the top.
If you wish, you can fill in the hole around the cables with a good
marine caulking compound. No matter what type of installation you
prefer, be sure to leave enough slack in the cables to allow tilting or
swiveling the unit.
Attach the unit to the gimbal bracket using the supplied gimbal knobs
Attach the unit to the gimbal bracket using the supplied gimbal knobs
and washers. Attach the cables and the unit is ready to use.
In-Dash Installation
You can mount the LCX-27C and LCX-28 C HD in the dash with an
optional FM-3 In-Dash Adapter Kit. The kit includes mounting
In-Dash Installation
You can mount the LCX-27C and LCX-28 C HD in the dash with an
optional FM-3 In-Dash Adapter Kit. The kit includes mounting
hardware and a template for cutting the hole.