Lowrance lcx-112c 操作指南

 

83

in a large amount of clutter appearing on the screen. If this occurs, just 

decrease the sensitivity to a level that eliminates the clutter. When you 
turn HyperScroll off, you can return to your original sensitivity level. 

 

 

To change Ping Speed: 
1. From the Sonar Page, press 

|

↓ to 

|

. 

2. The Ping Speed Control Bar appears. Press 

↑ to increase ping speed; 

press 

↓ to decrease ping speed. When it's set at the desired level, press 

. 

To turn off HyperScroll: 
1. From the Sonar Page, press 

|

↓ to 

|

. 

2. The Ping Speed Control Bar appears. Press 

↓ to decrease ping speed 

to 50 percent. When it's set at the desired level, press 

. 

When you boost ping speed and switch into HyperScroll, the width of 

the FasTrack bar graph display doubles at the right side of the screen. 

This allows you to see the virtually instantaneous sonar returns better, 
just as you would on a flasher sonar unit. For more information on 

FasTrack, see its entry in this section. 

This command will reset all features, options and settings to their 
original factory defaults. This is useful when you have changed several 

settings and want to return the unit to basic automatic operation. 

1. Press 

|

|

↓ to 

|

|

↓ to 

|

. 

2. Press 

← to 

|

. 

3. All the menus are cleared and the unit reverts to the Map Page at 

the 4000-mile zoom range, just as if you had turned it on for the first 

time. All options have been returned to the factory settings.