Lowrance lms-334c igps 操作指南
124
To transfer data from the unit to the MMC: press
ENT
.
To transfer data from the MMC to the unit: press
→ to
L
OAD
|
ENT
.
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
Data File, press
↓ to
S
AVE
D
ATA
|
ENT
. If you want to rename the file (as
shown in the following figures), press
ENT
to activate the selection box.
Press
↑ ↓ to change the first character, then press → to the next char-
acter and repeat until the name is correct. Then, press
ENT
|
↓ to
S
AVE
D
ATA
|
ENT
.
The unit will display first a progress message followed by a completion
message when the data transfer is finished. To return to the Page view,
repeatedly press
message when the data transfer is finished. To return to the Page view,
repeatedly press
EXIT
.
These (left to right) figures show the menu sequence for naming and
saving a GPS Data File from the unit's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
File (*.USR) on the card. To select a file, press
ENT
to activate the selec-
tion box, use
↓ ↑ to highlight the file, then press
ENT
to accept the se-
lection. Next, press
↓ to
L
OAD
D
ATA
|
ENT
. The unit will display a comple-
tion message when the data transfer is finished. To return to the Page
view, press
view, press
EXIT
repeatedly.