Lowrance lms-332c 操作指南

70

From the Sonar Page, press 

|

↓ to 

|

|

.

NOTE:

The sonar's depth capability depends on the water, bottom condi-
tions, transducer installation and other factors.

Depth Range - Upper and Lower Limits

Virtually any segment of the water column can be displayed by using
the upper and lower limit feature. This lets you pick the shallow and
deep depth range limits that are shown on the screen, provided there is
at least 10 feet between the upper and lower limit you select. For ex-
ample, a range from 12 feet to 34 feet could be used.

Changing the upper and lower limits gives you far greater control over
the depth range. This feature lets you "zoom in" the display in almost
unlimited combinations. Nearly any segment of the water column, from
the surface to the bottom can be shown.

 

Left, Sonar Page Menu with Upper and Lower Limits command se-
lected. Right, Sonar Chart Limits menu with Upper Limit selected.

To change the upper and lower limits:

1. From the Sonar Page, press 

|

↓ to 

|

.

The Sonar Chart Limits menu appears, with Upper Limit selected.

2. To set the upper limit, press 

. Press 

↑ or ↓ to change the first

number, then press 

→ to move the cursor to the next number and re-

peat until the depth is correct, then press 

.

3. To set the lower limit, press 

↓ to 

|

. Press 

↑ or ↓ to

change the first number, then press 

→ to move the cursor to the next

number and repeat until the depth is correct, then press

|

|

.