Lowrance lms-350a 操作指南
13
next to the “GROUP A” label
was pressed. The screen
shown at the top of the next
page appears.
The depth window appears in
the upper right corner of the
screen. Press the key adjacent
to the “NEXT WINDOW” label
to move through the windows.
If you reach the last window, or
if you wish to go backwards
through the windows, press the
key next to the “PREV WIN-
was pressed. The screen
shown at the top of the next
page appears.
The depth window appears in
the upper right corner of the
screen. Press the key adjacent
to the “NEXT WINDOW” label
to move through the windows.
If you reach the last window, or
if you wish to go backwards
through the windows, press the
key next to the “PREV WIN-
DOW” label. When the desired window is on the screen, press the key next
to the “USE WINDOW” label. The screen clears, placing the new window
in the upper left corner of the screen. If the new window takes up half the
screen, the unit will place it on the left side of the screen.
to the “USE WINDOW” label. The screen clears, placing the new window
in the upper left corner of the screen. If the new window takes up half the
screen, the unit will place it on the left side of the screen.
Continue with the window selections until the screen is filled. The unit will
stay in the windows mode using your new customized screen. If you don’t
want to fill a screen and only use one, two, or three windows in a group,
simply press the key adjacent to the “STOP” label. This saves the group
and exits the modify windows mode.
stay in the windows mode using your new customized screen. If you don’t
want to fill a screen and only use one, two, or three windows in a group,
simply press the key adjacent to the “STOP” label. This saves the group
and exits the modify windows mode.
Remember, you can always return to the full screen sonar mode by
pressing the “SONAR” key in the bottom left corner of the LMS-
350A. To switch back to your customized screen from the full screen
sonar, simply press the WINDOWS key, then use the down arrow key to
switch to the group you customized.
pressing the “SONAR” key in the bottom left corner of the LMS-
350A. To switch back to your customized screen from the full screen
sonar, simply press the WINDOWS key, then use the down arrow key to
switch to the group you customized.
NOTE: The LMS-350A saves all window changes in memory. It keeps
these changes even if power is turned off. However, a preset does erase
all window changes and returns to the standard windows.
these changes even if power is turned off. However, a preset does erase
all window changes and returns to the standard windows.
RESETTING ALL GROUPS
To return all of the groups to their factory settings without turning the unit
off and on again, press the WINDOWS key, then press the MENU key,
then press the key adjacent to the “MAIN MENU” label. Now press the key
adjacent to the “RE-PROGRAM A GROUP” label. Finally, press the key
To return all of the groups to their factory settings without turning the unit
off and on again, press the WINDOWS key, then press the MENU key,
then press the key adjacent to the “MAIN MENU” label. Now press the key
adjacent to the “RE-PROGRAM A GROUP” label. Finally, press the key