Lowrance lms-350a 操作指南
57
below sea level. You would
need to enter the numbers “35”,
then press the key next to the
"Altitude + -" label to change it
to -35 feet. Press the key next
to the “Accept Alt” label when
you’re done.
need to enter the numbers “35”,
then press the key next to the
"Altitude + -" label to change it
to -35 feet. Press the key next
to the “Accept Alt” label when
you’re done.
CHANGE TIME
To change the local time (the time at your position), press the arrow keys
to move the black box to the "Local Time" field. Now press the key next
to the “Change Time” label. The screen shown below appears.
To change the local time (the time at your position), press the arrow keys
to move the black box to the "Local Time" field. Now press the key next
to the “Change Time” label. The screen shown below appears.
Use the number keys to enter
the time. Remember to enter a
zero first if the time is less than
10. For example, enter 073000
for 7:30. Press the key next to
the "Time AM PM" label to
change the time from AM to
PMPress the key next to the
“Accept Time” label when
you’re finished.
the time. Remember to enter a
zero first if the time is less than
10. For example, enter 073000
for 7:30. Press the key next to
the "Time AM PM" label to
change the time from AM to
PMPress the key next to the
“Accept Time” label when
you’re finished.
CHANGE DATE
To enter today’s date, press
the arrow keys to move the black box to the "Local Date" field. Now press
the key next to the “Change Date” label. Use the number keys to enter the
date. Press the key next to the “Accept Date” label when you’re finished.
To enter today’s date, press
the arrow keys to move the black box to the "Local Date" field. Now press
the key next to the “Change Date” label. Use the number keys to enter the
date. Press the key next to the “Accept Date” label when you’re finished.
The numbers at the top of the screen should be correct. If they aren’t,
press the key next to the label that you need to change. If everything is
correct, press the key next to the “Exit” label. The unit will switch to the
position screen and start searching for the satellites currently in view. It
should find the satellites and show a position in a few minutes.
press the key next to the label that you need to change. If everything is
correct, press the key next to the “Exit” label. The unit will switch to the
position screen and start searching for the satellites currently in view. It
should find the satellites and show a position in a few minutes.
COLD START
When the LMS-350A is turned on for the first time “out of the box”, it
automatically sends a “cold start” message to the GPS receiver. You also
can send a cold start message to the receiver.
When the LMS-350A is turned on for the first time “out of the box”, it
automatically sends a “cold start” message to the GPS receiver. You also
can send a cold start message to the receiver.