Lowrance lms-350a 操作指南
73
shown above appears.
Use the keys on both sides of
the screen to enter the way-
point name. For example, to
name a waypoint “COVE 1”,
press the ALARM key repeat-
edly until the letter “C” appears
in the window. Next, press the
right arrow key to move the
black box to the next letter po-
sition. Now press the WAYPT
RECALL key repeatedly until
the “O” appears on the screen. Repeat this process until the entire name
has been written on the screen. Now press the key next to the “Accept
NAME” label. The LMS-350A returns to the waypoint save menu as shown
above. To save the waypoint with this name, first press the key next to the
“Save WPT” label. Now press the key next to the “Exit” label to exit this
menu.
the screen to enter the way-
point name. For example, to
name a waypoint “COVE 1”,
press the ALARM key repeat-
edly until the letter “C” appears
in the window. Next, press the
right arrow key to move the
black box to the next letter po-
sition. Now press the WAYPT
RECALL key repeatedly until
the “O” appears on the screen. Repeat this process until the entire name
has been written on the screen. Now press the key next to the “Accept
NAME” label. The LMS-350A returns to the waypoint save menu as shown
above. To save the waypoint with this name, first press the key next to the
“Save WPT” label. Now press the key next to the “Exit” label to exit this
menu.
Erase a Waypoint
The Waypoint Erase feature
lets you erase waypoints from
the list. To erase a waypoint,
first press the WAYPT key, then
press the key next to the "WPT
Save" label. Now press the key
next to the “Increase WPT” or
“Decrease WPT” label until the
desired waypoint number ap-
pears on the screen. Simply
press the key next to the
“ERASE WPT” label. The
screen shown above appears. A message appears on the screen that
says “WAIT!! DELETE WAYPOINT ARE YOU SURE?.” If you are certain
this is the waypoint that you wish to erase, press the key next to the “YES”
arrow. If not, press the key next to the “NO” arrow. Press the key next to
the “YES” arrow to erase all information from the displayed waypoint
number.
The Waypoint Erase feature
lets you erase waypoints from
the list. To erase a waypoint,
first press the WAYPT key, then
press the key next to the "WPT
Save" label. Now press the key
next to the “Increase WPT” or
“Decrease WPT” label until the
desired waypoint number ap-
pears on the screen. Simply
press the key next to the
“ERASE WPT” label. The
screen shown above appears. A message appears on the screen that
says “WAIT!! DELETE WAYPOINT ARE YOU SURE?.” If you are certain
this is the waypoint that you wish to erase, press the key next to the “YES”
arrow. If not, press the key next to the “NO” arrow. Press the key next to
the “YES” arrow to erase all information from the displayed waypoint
number.
Recall a Waypoint
You must recall a waypoint in order to navigate to that position with the
LMS-350A. To recall a waypoint, first press the WAYPT key, then press
the key next to the "WPT Recall" label. The screen shown at the top of the
You must recall a waypoint in order to navigate to that position with the
LMS-350A. To recall a waypoint, first press the WAYPT key, then press
the key next to the "WPT Recall" label. The screen shown at the top of the