Lowrance lms-522c igps 操作指南

212 

1. Press 

|

, select 

 and press 

. 

2. Highlight 

 and press 

, which will turn 

on/off Backlight Synchronization.  
3. Press 

 repeatedly to get back to the main display. 

All configurable devices are configured through their Device Configura-

tion menus, which may be accessed through the network devices list on 

the Bus Configuration menu.

1. Press 

|

, use 

↑ ↓ to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page. 
3. Select the temp sensor you want to rename and press 

. The De-

vice Configuration menu will appear with the Device Name dialog box 

highlighted. 
4. Press 

 and use 

↑ ↓, ← → to input the desired name for the temp 

sensor. Press 

. Press 

 repeatedly to get back to the main dis-

play. 

1. Press 

|

, use 

↑ ↓  to select 

 and press 

. The 

NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-

agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-

chronization.  
2. Highlight 

 and press 

, which will open the Bus Configu-

ration menu. A list of network devices will be at the top of the page. 
3. Select the desired temp sensor and press 

. The Device Configura-

tion menu will appear.  
4. Highlight 

 and press 

. The following list of Temp Types 

will appear: Water, Outside, Inside, Engine Room, Cabin, Live Well, 

Bait Well, Refigeration, Heating System and Unknown. 
5. Highlight the desired Temp Type and press 

. The following con-

firmation message will appear: Are you sure you wish to change this 
device's configuration?  
6. Highlight 

 and press 

. Press 

 repeatedly to get back to the 

main display.