Lowrance lms-522c igps 操作指南

51 

1. Depress the 

 key to turn on the unit. 

2. Opening screen displays Map Page. Rotate through the four main 

Page screens (Map Page, Satellite Status Page, Navigation Page, Sonar 
Page) by pressing 

|

← or → to select Page Name|

. Switch 

Pages to display Sonar Page. 

3. If GPS data is desired, wait while unit locates satellites and calculates 

current position. When the unit acquires position, a tone sounds and a posi-

tion acquired message appears. 

4. With position acquired (if desired), head for your fishing grounds. 

Your unit will automatically display digital depth and surface water 

temperature in the top left corner of the screen. 

The auto settings will track the bottom, displaying it in the lower por-

tion of the screen. The full sonar chart will scroll from right to left, 

showing you what's under the boat as you cruise across the water. You 

can change the display by: 

      Zoom in to enlarge the chart for more detail: press 

. 

      Zoom out to return to full chart mode: press 

. 

5. Watch the display for the appearance of fish symbols (or arches, if 
Fish I.D.

™ is turned off). When you see fish symbols or arches, you've 

found fish! Stop the boat and get your lure or bait into the water at the 

depth indicated on the sonar chart. 

6. Gauge the fish depth by visually comparing the fish symbols or 

arches with the depth scale on the right side of the screen. 

7. If you are drifting at a very low speed or anchored, you are not mov-

ing fast enough for a fish to return the tell-tale fish arch signal. As you 

drift over a fish, or as a fish swims through the transducer's signal 

cone, the fish echo will appear as a straight line suspended between the 

surface and the bottom when Fish I.D. is turned off. 

8. To turn off the unit, press and hold 

 key for three seconds.