Lowrance lms-522c igps 操作指南

83 

 

 

To adjust sensitivity in manual mode: 

1. First, turn off Auto Sensitivity: from the Sonar Page, press 

|

↓ 

to 

|

. 

2. Press 

↑ to 

|

 and the Sensitivity Control Bar appears. 

Press 

↓ or ↑ to pick a different sensitivity setting. When it's set at the 

desired level, press 

. 

To turn Auto Sensitivity back on: 
From the Sonar Page, press 

|

↓ to 

|

|

. 

To return to the original factory setting for Auto Sensitivity, see the 

entry in this section on Reset Options. If sensitivity is in manual 

mode, the Reset Options command will switch back to Auto and re-

set the factory setting at the same time. 

For quicker sensitivity adjustments, try leaving the Sensitivity 

Control Bar on the screen as the chart scrolls. You can see the 

changes on the screen as you press the up or down arrows. This is 

handy when there's a lot of clutter in the water, and you are match-

ing the sensitivity to rapidly changing water conditions. 

The default color scheme for the sonar chart is the white background, 

but we offer other variations to suit your viewing preferences. The 

chart can be displayed in grayscale, reverse grayscale, blue back-

ground, white background, nightview, iceview, or bottom color tracking.