Extreme 10808 安装指南
Summit X450 Chassis Architecture
Extreme Networks Consolidated XOS Hardware Installation Guide
151
Summit X450-24t and X450-24x Rear View
shows the rear view for both the Summit X450-24t and Summit X450-24x models.
Figure 91: Summit X450 switch rear view
The rear panel consists of:
●
A slot for the dual 10-Gigabit Ethernet uplink module
●
The management port
■
Used to connect an Ethernet cable directly from your laptop into the management port to view
and locally manage the switch configurations.
and locally manage the switch configurations.
■
There are two LEDs for the management port, located in the bottom corners of the port. The LED
on the bottom right turns solid green when a cable is inserted and the port detects a link. The
LED on the bottom left blinks green when there is transmission activity on the link.
on the bottom right turns solid green when a cable is inserted and the port detects a link. The
LED on the bottom left blinks green when there is transmission activity on the link.
●
Two high-performance stacking ports
■
These ports are currently not supported but are reserved for future software features.
●
The connector for the optional Extreme External Power Supply System (EPS).
●
AC Power Socket
■
Both Summit X450-24t and Summit X450-24x switches automatically adjust to the supply voltage.
The power supply operates from 100 VAC to 240 VAC.
The power supply operates from 100 VAC to 240 VAC.
S450_003A
10 Gigabit
uplink option
Mgmt port
12 Gigabit stacking ports
Power socket
External power
supply connection