Extreme 10808 安装指南
Extreme Networks Consolidated XOS Hardware Installation Guide
9
Preface
This preface provides an overview of this guide, describes guide conventions, and lists other
publications that might be useful.
publications that might be useful.
WARNING!
Read the safety information in
thoroughly before installing any Extreme Networks switch. Failure to
follow this safety information can lead to personal injury or damage to the equipment.
WARNING!
Service to all equipment should be performed by
trained and qualified service personnel only! Before installing or
removing any components of the system, or before carrying out any maintenance procedures, you must read the
safety information provided in
safety information provided in
of this guide.
Introduction
This guide provides the required information to install an Extreme Networks
®
BlackDiamond
®
10K
series, BlackDiamond 8810 (formerly Aspen 8810), or Summit
®
X450 switch. It also contains information
about site location, switch functionality, and switch operation.
This guide is intended for use by network administrators responsible for installing and setting up
network equipment. It assumes a basic working knowledge of:
network equipment. It assumes a basic working knowledge of:
●
Local area networks (LANs)
●
Ethernet concepts
●
Ethernet switching and bridging concepts
●
Routing concepts
●
Simple Network Management Protocol (SNMP)
See the ExtremeWare XOS Concepts Guide and the ExtremeWare XOS Command Reference Guide for
information about configuring an Extreme Networks BlackDiamond 10K series, BlackDiamond 8810, or
Summit X450 switch.
information about configuring an Extreme Networks BlackDiamond 10K series, BlackDiamond 8810, or
Summit X450 switch.
NOTE
If the information in the release notes that shipped with your Extreme Networks switch differs from the information
in this guide, follow the release notes.
in this guide, follow the release notes.