Extreme 10808 安装指南

Extreme Networks Consolidated XOS Hardware Installation Guide

 shows the 10G2X module.

The 10G2X module has two unpopulated XENPAK-based 10 Gigabit Ethernet ports.

If you have one MSM installed, all ports on the 10G2X module are switched through that MSM. If you 
have two MSMs installed, the top port on the 10G2X module is switched through the MSM in slot A, 
and the bottom port is switched through the MSM in slot B during normal operation.

The default configuration of the 10G2X module is as follows. All ports:

●

Are added to the default VLAN as untagged.

●

Inherit the properties of the default VLAN (for example, protocol type and VLANid).

The 10G2X module has the following LEDs:

●

Module status

●

Port status

For information about the LEDs and their activity on the 10G2X module, see 

Module status LEDs

10 Gbs ports

ASP035