Intermec 10I2 用户指南
68
EasyLAN User’s Guide
Chapter 6 — Advanced Confi guration
/dev
Th
is is where devices used for input/output, such as uart1, Flash, net1,
Centronics, etc. are located.
lock:
When the electronic key hardware option is installed on the printer, this
directory is used to store all electronic key items that has been specifi ed
as locks by means of special software.
directory is used to store all electronic key items that has been specifi ed
as locks by means of special software.
pff s:
Th
e power fail fi le system is used to store fi les that need to be saved at
power down.
/rom
Th
is device is used to store a collection of fi les that are available as default
in the printer, for example the default web pages, fonts, and images.
images
Th
is directory is used to store images used for the default web pages.
secure
Th
is directory is used to store the password protected web pages.
storage:
When the electronic key hardware option is installed on the printer,
this directory is used as complementary storage for the software
corresponding to the key hardware.
this directory is used as complementary storage for the software
corresponding to the key hardware.
tmp:
Th
is is the printer’s temporary read/write memory. It will lose its content
when the power is switched off or at a power failure. Th
us, do not use
“tmp:” to store valuable data. One advantage of using “tmp:” instead
of “/c” to temporarily store data is that data can be written to SDRAM
faster than to the fl ash memory.
of “/c” to temporarily store data is that data can be written to SDRAM
faster than to the fl ash memory.
Limitations
pff s
pff s
Th
e /pff s device has a limitation. Files stored on this unit cannot exceed
the size of 256 bytes each, and the total size of the “pff s” unit is 32 KB.