Intermec 6622 用户指南
SECTION 5
"
Connecting Peripheral Equipment
PEN*KEY
R
6622 Pen Computer User’s Guide
5-3
Connecting Peripheral Equipment
Figure 5-1
Printer/Floppy Drive Connectors
Parallel Port
RS232 Connector
B
CAUTION:
When connecting devices and cables, always be sure to turn off the
power for the pen computer first.
1. Turn off the power for both the pen computer and the peripheral
device.
2. Open the connector cover on the rear of the pen terminal, and
confirm which connector you want to use.
3. Connect the cable for the peripheral device to the pen terminal.
4. Tighten the two screws on the cable connector.
5. Turn on the power for both the pen computer and the peripheral
4. Tighten the two screws on the cable connector.
5. Turn on the power for both the pen computer and the peripheral
device.