Intermec 2460 补充手册
Trakker Antares 246X Stationary Terminal User’s Manual Addendum
14
Interleaved 2 of 5 Enhancements
Description:
Interleaved 2 of 5 (I 2 of 5) is a high-density, self-checking, continuous numeric
symbology. With firmware version 6.15 and later, you can now set two additional
parameters.
symbology. With firmware version 6.15 and later, you can now set two additional
parameters.
Syntax:
CAdata
Additional values for data are:
95
Case code (6 or 14) with check digit verified but discarded
96
Variable length with check digit verified but discarded
Existing values for data are 0, 2-32, 97, 98, and 99. Only the new values for data are
described in this section. For more information about the existing values, see
“Interleaved 2 of 5” in Chapter 8, “Configuration Command Reference,” in your user’s
manual.
described in this section. For more information about the existing values, see
“Interleaved 2 of 5” in Chapter 8, “Configuration Command Reference,” in your user’s
manual.
Default:
Disabled
Scan:
One of these bar codes:
Enable Case Code With Check Digit
Enable Variable Length With Check Digit
Verified But Discarded
Verified But Discarded
*$+CA95*
*$+CA96*
*$+CA95*
*$+CA96*
Keypad Control
Description:
Enables or disables the keypad. When you disable the keypad, you cannot use the
keypad to enter information into the terminal.
keypad to enter information into the terminal.
Syntax:
KEdata
Acceptable values for data are:
0
Disable keypad
1
Enable keypad
Default:
Enabled
Scan:
One of these bar codes:
Disable Keypad
Enable Keypad
*$+KE0*
*$+KE1*
*$+KE0*
*$+KE1*