Intermec 1514 参考指南

Inserting the Scanner and Scanning Hands-Free

1. Place the scanner handle on the

bottom ledge of the holder and
then rotate the handle into the
holder until it snaps into place.

2. Align the scanner and adjust the

column height so that the
scanner’s pulsating laser beam
covers the entire label on the base
of the stand.

Note:

The 1550A02, 04 and

1551AXX scanners must use the
reflective label. Place the reflective
label that was shipped with the
scanner stand over the label on the
base of the stand.

3. To scan a bar code label, place the bar code right-side up over the

label on the base of the stand.

When the terminal or scanner beeps, the bar code has been read.

Hand-Held Scanning

If you remove the scanner from the stand, it will immediately reset to
hand-held scanning. When you return the scanner to the stand, it will
resume a pulsating laser beam and scan bar codes placed over the label
on the base of the stand.

If you use a 1551AXX decoding laser scanner for extended hand-held
scanning, disable Stand mode to conserve power.

To disable Stand mode

If you have a 1551AXX decoding laser scanner,
scan this bar code:

Disable Stand

155XQ.004

*HI*

6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280

P/N 063792-003