Citel 6000 安装指南
EXTender 6000 Quick Installation Guide
30
IP Parameters
An Internet Protocol (IP) address and associated routing parameters must be entered within the IP menu
of the EXTender for identification purposes within the LAN.
Note: The network administrator must provide the IP address and any required mask or router addresses.
Settings The following IP settings are required:
Address- This is the IP address of the EXTender.
Subnet Mask – A number used to identify the IP subnetwork on the LAN.
Default Router – The address of a device used to reach IP hosts not on this IP sub-network.
Procedure
1. Access the IP Menu using the following path;
of the EXTender for identification purposes within the LAN.
Note: The network administrator must provide the IP address and any required mask or router addresses.
Settings The following IP settings are required:
Address- This is the IP address of the EXTender.
Subnet Mask – A number used to identify the IP subnetwork on the LAN.
Default Router – The address of a device used to reach IP hosts not on this IP sub-network.
Procedure
1. Access the IP Menu using the following path;
Path:
->Configuration->IP->Address
The following menu appears:
Figure 20: IP Address Menu
2. Press
the
Æ
key to access the parameters.
3. Press
the
Ækey to the Address parameter. Enter the IP Address of the EXTender and press Enter.
4. Press
the
È
key to the Subnet Mask parameter. Enter the IP Address of the Subnet Mask and press
Enter.
5. Press
the
È
key to the Default Router parameter. Enter the IP Address of the Default Router and
press Enter.
6. Press
the
Å
and Èkey to the Save option. Press Enter to save changes to the active config (.rem)
file.