IBM 1125 参考指南
−
Base printer models and duplex models have 8 MB
SDRAM standard. The network and duplex/network
models have 16 MB SDRAM standard.
SDRAM standard. The network and duplex/network
models have 16 MB SDRAM standard.
The standard memory is soldered on the controller
board.
board.
There are two memory slots available for
SDRAM memory and flash memory. The controller
supports a maximum of 264 MB of SDRAM memory
(total of soldered and memory slots) for base and
duplex models and 272 MB of SDRAM memory
(total of soldered and memory slots) for network
and duplex/network models.
supports a maximum of 264 MB of SDRAM memory
(total of soldered and memory slots) for base and
duplex models and 272 MB of SDRAM memory
(total of soldered and memory slots) for network
and duplex/network models.
•
Memory for Infoprint 1125
−
Base printer models have 16 MB SDRAM standard.
The network and duplex/network models have
32 MB SDRAM standard.
The network and duplex/network models have
32 MB SDRAM standard.
The standard memory is soldered on the controller
board.
board.
There are two memory slots available for
SDRAM memory and flash memory. The controller
supports a maximum of 272 MB of SDRAM memory
(total of soldered and memory slots) for base
models and 288 MB of SDRAM memory (total of
soldered and memory slots) for network and
duplex/network models.
supports a maximum of 272 MB of SDRAM memory
(total of soldered and memory slots) for base
models and 288 MB of SDRAM memory (total of
soldered and memory slots) for network and
duplex/network models.
•
Printer System Attachment Interfaces
−
Infoprint 1120 and 1125 base printer models, and
the duplex models of Infoprint 1120 have an IEEE
1284 Parallel interface with a Type B connector and
a USB interface.
the duplex models of Infoprint 1120 have an IEEE
1284 Parallel interface with a Type B connector and
a USB interface.
−
Infoprint 1120 and 1125 Network printer models,
and the duplex/network models have a USB
interface and integrated 10/100BaseTX Fast
Ethernet interface.
and the duplex/network models have a USB
interface and integrated 10/100BaseTX Fast
Ethernet interface.
Print Quality
Both Infoprint 1120 and 1125 support the following print
resolutions:
resolutions:
•
300 x 300 dpi (dots per inch)
•
600 x 600 dpi (default resolution)
•
1200 Image Quality (default driver resolution)
•
1200 x 1200 dpi
The toner darkness setting offers ten user-selectable
settings to balance print darkness and toner savings. The
higher the setting, the darker the print. Within the range
of print darkness settings, up to 50% toner savings can
be realized from a setting of one.
settings to balance print darkness and toner savings. The
higher the setting, the darker the print. Within the range
of print darkness settings, up to 50% toner savings can
be realized from a setting of one.
The toner darkness
setting is available through the operator panel under the
Print Quality menu and also accessible from the print
driver.
Print Quality menu and also accessible from the print
driver.
Font Support for Infoprint 1120 and Infoprint 1125
Both printers
′
resident fonts include support for following:
Number of
Number of
Emulation
Scalable Fonts
Bitmapped Fonts
PCL 6
84
2
PostScript
156
0
PPDS
39
5
Accessibility by People with Disabilities
For Hardware Offerings
The following features support use by people with
disabilities:
disabilities:
•
Controls and latches operable with one hand and
minimal dexterity
minimal dexterity
•
Keys are discernible by touch without activating them
•
The display, controls, latches, and levers are
accessible to someone in a wheel chair
accessible to someone in a wheel chair
•
Color is used as an enhancement for conveying
information, and distinguishing between buttons,
controls, and latches.
information, and distinguishing between buttons,
controls, and latches.
Euro Currency
For more information on the implications of the euro, visit
the IBM euro Web site at:
the IBM euro Web site at:
http://www.ibm.com/euro
These products are EuroReady.
EuroReady Products
IBM considers an IBM product to be EuroReady if the
product, when used in accordance with its associated
documentation, is capable of correctly processing
monetary
product, when used in accordance with its associated
documentation, is capable of correctly processing
monetary
data in the euro denomination and of respecting
the euro currency formatting conventions (including the
euro sign).
euro sign).
This assumes that all other products (for
example, hardware, software, and firmware) that are used
with this product are also EuroReady.
with this product are also EuroReady.
IBM hardware
products that are EuroReady may or may not have an
engraved euro sign key on their keyboards.
engraved euro sign key on their keyboards.
Currently, EuroReady status applies primarily to IBM
products specific to the EMU countries. Products that are
not specific to these countries are deemed to be “not
ready” for euro unless otherwise stated in the product
products specific to the EMU countries. Products that are
not specific to these countries are deemed to be “not
ready” for euro unless otherwise stated in the product
′
s
country-specific specifications.
EuroReady Solutions
IBM considers a solution to be EuroReady when the
solution providers have:
solution providers have:
•
Analyzed the euro requirements, including the need to
comply with relevant EC rules
comply with relevant EC rules
•
Built in appropriate function
and can clearly demonstrate this by:
•
Detailing euro related requirements
•
Describing how these will be implemented in the
solution
solution
•
Declaring when the implementation will be generally
available
available
The euro capabilities of a EuroReady solution will be
clearly identified as features of the solution specification
as described in the contracts document.
clearly identified as features of the solution specification
as described in the contracts document.
Trademarks
Intelligent Printer Data Stream and IPDS are trademarks of
International Business Machines Corporation in the United
States or other countries or both.
Infoprint and AS/400 are registered trademarks of
International Business Machines Corporation in the United
States or other countries or both.
Other company, product, and service names may be
trademarks or service marks of others.
International Business Machines Corporation in the United
States or other countries or both.
Infoprint and AS/400 are registered trademarks of
International Business Machines Corporation in the United
States or other countries or both.
Other company, product, and service names may be
trademarks or service marks of others.
-3-
101-199