LiteOn lvc-9015g 用户指南
19
Recording
1. Connect the DV camcorder to the unit using a IEEE-
1394 4-pin cable.
1394 4-pin cable.
Notes:
1. The DV-Link input jack on this unit is for DV compatible
camcorders only.
2. Only DV signals can be input via the DV-Link jack to this DVD
Recorder.
3. Do not connect a MICRO MV format video camcorder to this DV-
Link (IEEE-1394) jack.
4. You cannot connect more than two pieces of video input sources
at the same time to the front panel connector of this unit.
camcorders only.
2. Only DV signals can be input via the DV-Link jack to this DVD
Recorder.
3. Do not connect a MICRO MV format video camcorder to this DV-
Link (IEEE-1394) jack.
4. You cannot connect more than two pieces of video input sources
at the same time to the front panel connector of this unit.
2.Power on your TV and this unit.
3.Make sure that a recordable disc or a VHS tape is
inserted or loaded for recording.
inserted or loaded for recording.
When you insert a new recordable disc for recording, the recorder
will automatically start the disc preparation process.
When you insert a recordable CD-R or CD-RW disc for recording,
select a disc format for the unit to prepare the disc as (Audio CD,
VCD or SVCD).
will automatically start the disc preparation process.
When you insert a recordable CD-R or CD-RW disc for recording,
select a disc format for the unit to prepare the disc as (Audio CD,
VCD or SVCD).
4.Power on the DV Camcorder and initiate it in “Play-
back” mode. “Pause” the playback on the DV
Camcorder at where you want to start recording from.
back” mode. “Pause” the playback on the DV
Camcorder at where you want to start recording from.
5.Press [SOURCE] on the Recorder’s remote control to
change the signal input source to “DV.”
change the signal input source to “DV.”
AV1-Front - For a device connected to the front Audio/Video Input.
AV2-Rear - For a device connected to the rear Audio/Video Input.
S-Video -
AV2-Rear - For a device connected to the rear Audio/Video Input.
S-Video -
For a device connected to the rear S-Video Input.
DV -
For a device (such as a digital camcorder) connected
to the front DV Input with a DV cable.
6.Press [DVD] to control the DVD Recorder or [VHS] to
control the VCR deck.
control the VCR deck.
7.Cue the DV camcorder and start play back at the
beginning of the scene you wish to record.
beginning of the scene you wish to record.
Recording from a DV Camcorder
8.Resume the playback of the DV Camcorder and
press [RECORD] on the unit’s remote control to start
recording.
press [RECORD] on the unit’s remote control to start
recording.
Press [ PAUSE ] to pause recording .
Press [ PAUSE ] again or [RECORD] to resume
recording.
Press [ STOP] to stop recording.
Press [ PAUSE ] again or [RECORD] to resume
recording.
Press [ STOP] to stop recording.
DV control
This unit allows basic DV control functions with the Remote
Control. The unit is equipped with a on-screen DV control bar (Play,
Stop, FF or Reverse) feature when the DV is connected to the unit
via the DV Link connection. Move the screen cursor to the desired
function by pressing [
Control. The unit is equipped with a on-screen DV control bar (Play,
Stop, FF or Reverse) feature when the DV is connected to the unit
via the DV Link connection. Move the screen cursor to the desired
function by pressing [
] [] [] [] and press [ENTER]..
1.Press [
] [] to select (
) and press
[ENTER] to fast-forward the DV Camcorder
footages.
footages.
2.Press [
] [] to select (
)and press
[ENTER] to rewind the DV Camcorder footages.
3.Press [
] [] to select (
) and press
[ENTER] to stop the DV Camcorder playback.
4.Press [
] [] to select ( ) and press [ENTER]
to start the DV Camcorder playback.
5.Press [
] [] to select (
) and press
[ENTER] to pause the DV Camcorder playback.
Note:
This unit will stay in “Pause” mode when no DV input signal is
detected.
detected.