LiteOn lvc-9015g 用户指南

Playback

VHS Tape playback

Turn on the television and select the appropriate video input on the
television to suit the connections for the player.

Press [ POWER ] to turn on the unit.

Press to turn the unit on or off.
Lights up in red when the power is off.

Press [VHS] to switch the remote control mode

to VCR.

Make sure you press before performing any VCR operations.
When in VCR mode, the button beneath the Cassette Loading
Slot’s [ EJECT ] button on the front panel lights each time
you press the [VHS] button.
When the light is:
1. Green: the tape deck is in either “idle” or “playback” mode

and you can press valid keys for the tape deck to function.

2. Orange: the tape deck is in preparation mode and won’t

function when you press any keys.

3. Red: the tape deck is in “record” mode. Pressing

[

STOP] stops the tape recording.

Press [ EJECT ] to eject the cassette from

the cassette loading slot.

Press [ PLAY ] to start playback.

Press [

F.F. ] to perform fast forward

scanning.

Press repeatedly to play the disc forward at 2x, 4x, 8x ,16x.

Press [

REW ] to perform fast reverse

scanning.

Press repeatedly to play the disc reverse at 1x, 2x, 4x, 8x, 16x.

Press [ PAUSE] to pause playback.

Press [ DISPLAY ] to display the information of
the video cassette or the unit and the tape
counter.

Press [ TRACK +] or [TRACK -] to adjust the
playback quality

IF picture is distorted or there are noise line on screen during
playback, press TRACK (+/-) to adjust playback quality till it is
acceptable.

Note:

Some instance of poor playback quality may be due to media
conditions that may not be fully correctable.

Press [ PAUSE] again to start “frame by
frame mode”.

Press repeatedly to advance DVDs and Video CDs frame by
frame during playback in pause mode.
Press [ PLAY] to restart normal playback .