LiteOn dd-a100x 用户指南

Open the battery compartment and insert the batteries. 

Make sure the polarities (+ and -) match the markings 

inside the remote control.



 

Do not use rechargeable batteries.

The remote has a range of approximately 5M and works 

best when pointed directly at the unit horizontally at 

angles up to 30° from the sensor window of the DVD 

recorder.

Function buttons, such as GUIDER or TIMER, are 

designed to offer you a quick access to intended applica-

tions. Press these buttons to go directly to their individual 

menus and complete your desired tasks. If you would like 

to quit an application, simply press the designated button 

again. 

1.   Do not plug the AC power cord into the outlet until all 

other connections are made.

2.   It is recommended that you connect VIDEO OUT jack 

of the DVD recorder directly to the video input of your 

TV. Connecting VIDEO OUT jack of this recorder to 

a TV via a VCR may cause a viewing problem when 

playing a copyright-protected disc. The same viewing 

problem may also occur when connecting the recorder 

to an integrated TV/Video system.

 ..........................................................................................

Option 1  With Cable Box
Wall Outlet Cable Box DVD Recorder TV
1.   Use an antenna cable to connect the RF IN jack on the 

cable box to the antenna outlet on the wall.

2.   Use an antenna cable to connect the RF OUT jack on 

the cable box to the RF IN jack on the DVD recorder.

3.   Use an antenna cable to connect the RF OUT jack on 

the DVD recorder to the RF IN jack on the television.

Option 2  Without Cable Box
Wall Outlet DVD Recorder TV
1.   Use an antenna cable to connect the RF IN jack on the 

DVD recorder to the antenna outlet on the wall.

2.   Use an antenna cable to connect the RF OUT jack on 

the DVD recorder to the RF IN jack on the television. 

(Please note that this serves as a pass-through only.) 



   Please note that the RF connection serves as a video 

pass-through only. You need to finish all the following 

steps of connection to access the setup menu and other 

function of this DVD recorder.