LiteOn dd-a100x 用户指南

 1.    Refer to ‘Recording: Step by Step’ for the procedures 

of recording  on a disc from TV.

 Recording: Step by Step (p.28) 



 

 When the DVD recorder is switched on during record-

ing, you can only view the recorded channel on screen. 

If you would like to watch a different TV channel, you 

can do so by switching your TV’s input source to tuner 

device (e.g. antenna, cable box or satellite box). This 

will  not  affect  the  recording  already  in  progress.  For 

further information on how to change the input source, 

please check the instruction manual offered by your TV 

manufacturer.

, 

 

•  

Refer to ‘Recording: Step by Step’ for the basic 

procedures of recording on a disc.

 Recording: Step by Step (p.28) 

 ..........................................................................................

 1.    Press SOURCE repeatedly to select the correct signal 

source.  

Recording_02_03

 2.    Cue the external device and start playback at the 

beginning of the scene you wish to record.

 3.    Follow the general operation procedure in ‘Recording: 

Step by Step’ to start recording. 

 ..........................................................................................

•   The DV-Link INPUT jack on this recorder is for use 

with DV-compatible camcorders only, and not to be used 

for connecting any other firewire devices.

•   Only DV signals can be input to the DV-Link jack on 

this DVD recorder.

•   Do not connect a MICRO MV format video camcorder 

to the DV-Link jack.

•   Despite the technology endeavour with which this DVD 

recorder is built, it is still likely that your DV may not 

be fully supported by the unit. If you still experience 

problem using the DV-Link for recording, please 

connect your DV via S-Video or composite cables to 

this DVD recorder.

•   The DVD recorder is equipped with a camcorder control 

(Play, Stop, FF or FR) feature via the DV-Link con-

nection. Simply move the screen cursor to the desired 

function on the DV input screen, then press ENTER on 

the remote control.

 ..........................................................................................

 1.   Press SETUP to display the Setup menu.

Select recording mode through Recording  Record-

 2.    When completed, press SETUP to exit the Setup menu.
 3.    Press SOURCE repeatedly to select ‘DV’ as the signal 

source.

 4.    Cue the DV and start playback at the beginning of the 

scene you wish to record.

 5.    Follow the general operation to start recording. 

 1.    When all recording settings are confirmed, press 



RECORD twice to instantly start a 30-minute 

recording session.

 2.    For longer recording hours, press RECORD repeat-

edly, which will offer you a length option of up to 6 

hours in 30-minute increments.



 

  ‘One-Touch Recording’ will start with the DVD 

recorder’s default settings, if you do not make any 

setting changes before activating this function.



 

  The overall recording time depends on the selected 

recording mode and the storage capacity available on 

the disc.



 

  Recording will stop automatically when there is 

no more space on the disc. If you are using models 

which support double-layer DVD recording, please 

be reminded that one recording session in double-

layer discs cannot exceed 8 hours. Once the session 

has lasted for over 8 hours, this DVD recorder will 

automatically stop recording.