LiteOn dd-500g 用户指南

  •   You may not be able to record a program from TV or 

from another device connected to this recorder, if the 

source material is copy-protected (e.g. set in ‘Copy-

Once’ or ‘Copy-Never’ modes)..

  •   You CANNOT record/copy a rented or purchased video/

disc from another device (video cassette recorder, DVD 

player, DVD recorder, etc.) connected to this recorder. 

  •    This DVD recorder adopts the DVD+VR recording 

format, which enjoys a relatively greater compatibility. 

However, it is still likely that recordings made with this 

recorder may not be able to be played back on other 

DVD recorders or DVD players.

Follow the steps to start your first recording.

  Connecting to External Devices(p.13)

Check the disc types supported by the DVD recorder you 

are using.

 Recording Mode (p.46)

If the DVD recorder you are using supports recording on 
minus (-) DVD discs, and you use blank DVD-RW discs to 

record, you will need to format the discs before recording. 

Pressto  select  ‘Quick  Preparation’  or  ‘Full  Prepara-

tion’, then press ENTER. 

Recording_01_03

For Example, to record from TV, you need to select a 

channel first. Press TV(MODE) to select ‘TV’ as the 

signal source. then press CH and CH  to select a 

desired channel.

Recording_01_02

9) and ENTER. (For Channel 6, press 6, then ENTER. 

For Channel 55, press 5, 5 and ENTER.)

Press  RECORD to start recording.

To pause recording, press    PAUSE/STEP.

Press  STOP to stop recording. To start another record-

ing session, press  RECORD again after the previous 

recording is stopped.
Each new recording session is placed after the previous 

session unless a certain recording title is set to be overwrit-

ten.

 Overwriting a Title (p.41) 

For DVD+R. DVD-R and DVD-RW(formatted in ‘Quick 

Preparation’ mode), finalization is a necessary step if you 

want the discs to be played back on other compatible 

devices. Use the ‘Disc Tool’ in ‘Easy Guider’ to complete 

the process.



 

 You need to complete the channel scanning process 

before recording from TV..

 Setting TV Channels (p.18) 



 

 Before  recording,  you  can  set  the  recording  mode 

through  RecordingRecording  Mode  in  the  Setup 

menu.

 Recording Mode (p.46)