LiteOn lvw-5005x 用户指南
14
Channel Editing
Before channel editing
Ensure that the antenna cables are securely hooked up to the
unit.
Adding or deleting TV channel manually
1.Turn on the TV set and the DVD-Recorder,
and press [Source] to switch the input signal
source of the unit to “TV.”
and press [Source] to switch the input signal
source of the unit to “TV.”
2.Press [EDIT] to bring up the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the TV
channels and press [ENTER].
Move the cursor to the TV channel to make the selection and
press [ENTER] again to cancel the delete operation.
press [ENTER] again to cancel the delete operation.
Inserting the TV channels
1.Press [EDIT] to bring up the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the TV
channels and press [
].
2.Press [
] [] to select “Insert to” and press
[ENTER].
3.Press [
] [][] [] to enter the “Channel
number,” and press [ENTER]. The channel will
be moved to where you want to.
be moved to where you want to.
Swapping TV channels
This function allows you to manually swap the TV channel order
stored in the unit to match the TV channel order stored in your TV
set.
stored in the unit to match the TV channel order stored in your TV
set.
1.Press [EDIT] to bring up the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the “TV
Channel” and press [
].
2.Press [
] [] to select “Swap with” and
press [ENTER].
3.Press [
] [][] [] to enter the “Channel
number,” and then press [ENTER] to swap. The
order of the channels will be swapped with the
channel number selected.
order of the channels will be swapped with the
channel number selected.
4.To swap other TV channels, repeat step 3 to
complete the settings.
complete the settings.
5.Press [
] [][] [] to select “EXIT,” press
[ENTER] to save the setting and exit the
“Channel Editor” menu.
“Channel Editor” menu.
Moving up or moving down the TV channel
1.Press [EDIT] to appear the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the “TV
Channel” and press [
].
2.Press [
] [] to select the “Move Up” or
“Move Down” and press [ENTER].
The TV channel will change the address.
Each time you press [
Each time you press [
] or [] the item changes as follows.
Renaming TV channels
1.Press [EDIT] to bring up the “Channel Editor”
menu, press [
menu, press [
] [] to select one of the TV
channels and press [
].
2.Press [
] [] to select “Rename” and press
[ENTER].
The display for entering a title name appears.
3.Select the desired characters from the
keypad. Press [ENTER] after each entry.
keypad. Press [ENTER] after each entry.
4.When you finish
entering the title
name, press [
entering the title
name, press [
] []
[
] [] to select
“Finish.”
Note:
You only can enter up to 5
characters for a name.
characters for a name.